ANCEL BA101 Professional 12V 100-2000 CCA 220AH Automotive Load Battery Tester Digital Analyzer Bad Cell Test Tool for Car/Boat/Motorcycle and More

Price: AED267.73 - AED 211.75
(as of Jan 20,2024 00:46:34 UTC – Details)

From the manufacturer

The ANCEL BA101 can be used to test a wide range of 12V batteries including Starting, Lighting, and Ignition (SLI), Deep Cycled and Marine (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM), and GEL cell. The major battery standards JIS, SAE, EN, DIN, and IEC are supported. BA101 12V car battery can easily, quickly and accurately measure the actual cold cranking amps capability, the health status of the battery itself, and the common fault of the vehicle’s starting system and charging system.

The BA101 Advantages:

Simple and easy to usebatteries on and off the vehicleAccurate results in millisecondsBattery life analysisAnalysis results: Good or ReplaceLarge easy to read LCD screenTest results based on JIS, EN, DIN, SAE and IEC StandardsInputs battery volume (AH), then shows battery statusVehicle cranking system test – cranking time, voltage and statusStore the testing result and the print functionVehicle charging system test—load voltage, unloaded voltage, ripple status, and charging system status

BA101 Functions:

Test Results: Good or ReplaceInternal resistance value (m)Life in percentage (%)Cranking systemCharging systemOperating Parameters:System voltage: 12 VoltsInput voltage range: 9V~15VPower requirements: No internal batteries requiredCapacity: Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating

Five Different Results of Battery Testing

GOOD BATTERY: The battery is without any problem.GOOD, RECHARGE: Good battery but low current, and recharge before using.REPLACE: The battery is already at or near the end of its use life, and please replace the battery.BAD CELL, REPLACE: Battery interior damaged, bad cell or short circuit, and replace the battery.CHARGE-RETEST: Unstable battery shall be recharged and retested to avoid error.

Is the battery good or does it need to be replaced?

It tests the battery’s CCA (or AH) value, charge (%), voltage (v), internal resistance (Ω), rated, and battery health (%), etc. After a comprehensive analysis of the data, it provides an accurate whether a battery is good or needs to be replaced. The test result is shown directly by text prompt, giving an accurate display of the battery with percentage and numerical values.

Conductance correlates directly to the battery capacity. The passive testing method is safe. Never discharges or drain the battery. Able to test the condition of the discharged battery. Consistent and repeatable results. It provides a unique indication of battery conditions. Powers up when connected to the battery posts during testing. It provides checking the Alternator’s charging and Starter’s cranking conditions. It is maintenance free and no internal batteries required.

Multiple Battery Standards Support

It can test by AH and CCA values but also applies to other test standards such as BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.If your battery standard is AH standard, you can input the AH value to test in the “Quick Test” menu.If your battery is CCA or another standard, please input the CCA or other value to test in the “Battery in Vehicle” or “Battery out of vehicle” test menu.

Fast and Accurate Reading

It adopts the world’s most advanced conductance testing technology to date for accurate and authoritative test results.It quickly analyzes the data, usually taking 2-3 seconds to display the results.Easy to use, it can quickly and accurately identify battery problems.

Print Data Steps

Before using the print data function, it is necessary to connect the tool to a computer via the USB cable. Once ready, please insert the CD to the computer.Install the USB driver first.Open the print software, and choose the COM Port NO.Then choose the function of print data to start printing.

Is Discontinued By Manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 24.13 x 17.78 x 5.08 cm; 141.75 Grams
Date First Available ‏ : ‎ 15 November 2016
Manufacturer ‏ : ‎ ANCEL
ASIN ‏ : ‎ B01M0ARG3X
Item model number ‏ : ‎ BA101
Country of origin ‏ : ‎ China

Much wider test range (100-2000 CCA) and more accurate than its competitors. Test results are based on JIS, EN, DIN, SAE, CCA, BCI, GB, CA, MCA and IEC standards.
Provides an opportunity to check the charging status of the alternator and the starter. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status.
The BA101 Battery Tester is well built and features a large LCD display with white backlighting and adjustable contrast that shows test results directly. No internal batteries are required and power is drawn directly from the 12V battery.
It comes with a 3. 0-foot cable and is made of a very thick, flexible insulator that is much safer than others on the market. There are 4 buttons on the BA101. The up/down button is used to scroll through the menu. The Enter and Exit buttons are used to navigate back and enter the menu.